Vacuum Degasser
A photoelectric counting machine detects pieces as they pass a sensing point. To count sticky gummies consistently, it first needs to present them as separate pieces. A better sensor cannot reliably distinguish every pair of gummies that arrives as one touching cluster.
The feeding and separation stages therefore deserve as much attention as the advertised counting accuracy.
How pieces reach the sensor
Material moves from the hopper onto vibrating feed surfaces. Staged vibration spreads and guides pieces toward the counting channels. Each channel presents pieces to its sensing arrangement, and the control system releases the required batch into a positioned bottle.
The current machine material describes staged vibratory separation and photoelectric detection. The purpose is to create a stable, countable flow before the bottle receives its contents.
The sensor detects pieces in the counting path. It should not be described as looking into the filled bottle and directly verifying every finished count unless a separate inspection system actually provides that function.
Why gummy condition changes the result
Coating, moisture, shape and temperature influence whether pieces move independently. Product that separates easily in a cool sample bag may become more difficult after standing in a warm feed hopper.
Send production samples that represent normal conditions and the most difficult expected condition. Include the actual holding time before packaging and identify any powder, sugar or oil coating.
If pieces bond together upstream, the project may need an improvement in product conditioning or feeding as well as an adjustment to the counter.
Separate feed faults from sensing faults
| Observation | Investigation area |
|---|---|
| Clusters arrive at the channel | Upstream product condition and separation performance |
| Pieces overlap at the detection point | Channel loading and feed rate |
| Errors increase through the shift | Product buildup, dust and changing material condition |
| One channel repeatedly differs | Its feed path, cleanliness and sensing setup |
| Correct counts fail to enter the bottle cleanly | Discharge funnel, neck size and bottle positioning |
Start by observing the material path. A count error caused by clumping should not immediately be treated as an electronic calibration problem.
Throughput and separation need to be balanced
Increasing vibration may move more product, but it can also load the channel more densely or damage sensitive pieces. The useful setting produces a steady flow of individually detectable gummies at an acceptable damage rate.
Trial the proposed number of channels with the intended count per bottle. A large count keeps each bottle associated with a larger piece workload, while a small count can make bottle exchange a more visible part of the cycle.
Avoid specifying machine capacity from pieces per minute alone if the commercial requirement is accepted bottles per shift.
What an acceptance test should measure
Use a defined sample of finished bottles and verify the count independently. Report the number with the exact required count as well as the distribution of overcounts and undercounts.
Also record damaged gummies, jams and stops for cleaning or separation. If operators repeatedly break clusters by hand, that intervention belongs in the performance assessment.
Include hopper replenishment and a normal stop and restart. Those events can change feed density and reveal problems that a short continuous demonstration misses.
Can the same machine count nuts and gummies?
It may support both with appropriate settings and contact parts, but the products present different feeding and cleaning requirements. Compatibility must be tested rather than inferred from a broad application list.
For product changes, check access to the hopper, feed tracks, sensing paths and discharge funnels. Establish which parts are removable and how the next product is protected from residue left by the previous one.
Observe separation before interpreting the sensor result
Watch representative material at each feed stage and at the entrance to the counting path. Record where clusters persist, where pieces overlap and whether the flow changes as the hopper level falls.
If pieces are already touching at the sensing point, begin with presentation and product condition. Adjusting detection without addressing that physical overlap may not produce a repeatable result.
If pieces pass separately but one channel still differs, compare that channel with the others under the supplier's inspection method. This keeps the investigation focused and avoids treating every error as proof that the complete counting system needs replacement.
Compare product lots under normal packaging conditions
Provide samples representing the expected variation, including the coating and the condition after the normal waiting time before packaging. Label the lot and handling history so the trial record remains meaningful.
A small quantity selected because it separates easily can show that the mechanism operates, but it cannot establish suitability for a normal production lot containing the usual variation. Include the less convenient material the line is expected to handle.
Record room and product conditions where they are relevant to the comparison. Avoid changing the material's preparation solely for the demonstration unless that preparation will also be part of the production process.
Use finished-bottle counts to evaluate the result
Choose a defined sample of bottles and independently check their contents. Preserve each result rather than reporting only an average.
For illustration, nine bottles containing 60 pieces and one containing 59 produce an average of 59.9. That average may look close to target but still includes one bottle that does not meet an exact-count requirement. The commercial acceptance question concerns the finished packs, not just the closeness of the average.
The appropriate sample size and acceptance rule depend on the project. Agree on them before the trial so both parties assess the same evidence and do not choose a method after seeing the result.
Include repeated stops and hopper replenishment
A continuous short demonstration may miss a feed problem that appears when material settles or when a new charge enters the hopper. Mark those events and compare the resulting counts and separation behaviour.
Observe how operators resume production and what happens to material already in the channels. The procedure should identify interrupted bottles and explain how they are assessed before joining accepted output.
Record manual help used to separate clumps or clear the feed path. That help is part of the operating requirement. A trial requiring repeated intervention should not be described as equivalent to an unattended run at the same mechanical rate.
Match the counter to the intended automation stage
The powder and solid bottling guide distinguishes the counting task from bottle feeding, closure application and inspection. A standalone counter can be appropriate when those surrounding tasks are handled at the required rate.
For a future integrated line, identify how bottle positioning, stop signals and product supply will connect. A successful standalone count trial proves a defined counting duty; it does not automatically establish the output of every connected packaging stage.
Look at cleaning and product contact after the run
Inspect accessible feed surfaces, channels and funnels under the agreed procedure. Record retained material and the parts removed for cleaning. If the next product has a different coating or recipe, explain the required changeover to the supplier.
The final proposal should identify the tested product condition, contact-part configuration, count range and accepted rate. These details give the plant a reference for later variation and keep the machine selection grounded in separation and completed packages rather than a sensor percentage alone.
The [counting machine page](/product/counting-machine/) describes the standalone counting unit. For a gummy trial, [send representative pieces, coating details, the required count per bottle and bottle-neck dimensions](/contact/). Include the target shift output and photos or video of the current clumping problem.
Related guides
Sizing equipment for your line?
Send the product, the batch size and the utilities you have. We reply with the model, the cycle time and what the cooling side needs.


