Product range

Liquid Filling Machines

Piston, gravity and servo fillers for thin to viscous liquids, with change parts for each bottle format.

Filler to capper

Fillers, cappers, labellers and sealers matched to a single line speed.

Format changeover

Bottle, jar, cup and tube formats changed with guides and parts, not a rebuild.

Dose accuracy

Piston, auger or volumetric dosing chosen for how the product flows.

Drip-free filling

Nozzles, guards and contact parts arranged for clean, hygienic runs.

5 machines in this range

Shown in full

01Liquid Filling Machines

Jelly Cup Filling and Sealing Machine

Filling and sealing in one automatic cycle, with a photo-sensing register that checks every cup and corrects film position on the fly. Bubbles, weak seals and crooked lids are the three faults buyers complain about, and all three start at this station.

Types
semi-automatic tabletop / fully automatic all-in-one / inline multi-station high speed
Cycle
cup drop, dosing, film feed, heat seal, trim, discharge
Products
jelly, pudding, frozen drinks and other gelled foods
View machine

02Liquid Filling Machines

Tube Filling and Sealing Machine

Eight stations on one rotary table: tubes come out of the inclined bin, get registered, filled, ultrasonically welded, trimmed and date-coded in a single index. 5 to 250 ml at up to 60 tubes a minute, with a flat tail that carries no trapped product.

Model
GD-60, eight-station rotary table, up to 60 tubes/min
Range
5 to 250 ml at ±1%, tubes Ø10 to 50 mm and 50 to 240 mm long
Seal
Ultrasonic welding with synchronous trimming and date coding
View machine

03Liquid Filling Machines

3-in-1 Filling and Capping Machine

Bottle in, sealed bottle out on one rotary table: filling, plugging, cap dropping and capping with a cam indexer holding position at every station. 5 to 30 ml at ±1%, 18 to 25 bottles a minute, and no station fires without a bottle under it.

Output
18 to 25 bottles/min on two heads, 20 to 25 on one head
Range
5 to 30 ml at ±1%, magnetic pump or piston by viscosity
Stations
Feed, fill, plug, cap drop and cap tighten on a cam-indexed turntable
View machine

04Liquid Filling Machines

Liquid Filling Production Line

Four stations driven by one PLC: bottles come out of the unscrambler, get dosed at ±1%, capped and labelled at up to 100 bottles a minute. Format changes run off a recipe screen instead of re-tuning three machines that were never built to run together.

Line
GD-LFPL, linear four-station, unscrambler + filler + capper + labeller
Speed
Up to 100 bottles/min, filling resolution 0.01 s
Volume
10 to 1000 ml at ±1%
View machine

05Liquid Filling Machines

Liquid Filling Machine

Servo piston dosing with 4 to 12 heads, 100 to 5000 ml and plus or minus 1 percent accuracy, where a format change is a parameter setting rather than a mechanical rebuild. Suck-back nozzles stop the drip, and the position sensor stops the fill when no bottle is present.

Heads
4, 6, 8, 10 or 12, independent servo metering
Fill range
100–5000 ml, accuracy within ±1%
Output
1200–2400 bottles per hour depending on head count
View machine

About this range

Liquid filling splits into two families by container: rigid bottles and cups filled from above, and tubes filled from the open end and sealed shut. The metering principle is the same, the container handling is not.Choose by output first, then by product: water and clear juice run fast and foam little, while yogurt, sauce and pulp need slower heads, larger ports and anti-drip nozzles.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall