Product range

Turnkey Production Lines

Reception through to packed pallet, planned as one sequence with the buffers sized between stations.

One sequence

Reception, processing, filling and packing planned as a single line.

Buffers sized

Accumulation between stations set so a stop upstream does not starve the filler.

One control layer

Recipes and settings shared across the line, not set machine by machine.

Commissioned on site

Installation, commissioning and operator training before handover.

5 machines in this range

Shown in full

01Turnkey Production Lines

Counting Bottling Line

Eight stations from unscrambling to collecting, with desiccant insertion and induction sealing in between. The counting station runs 40 to 90 bottles a minute at 99.5% accuracy, and nothing moves unless a bottle sits under the gate.

Line
GD-ACBL, eight stations on one interlocked control
Speed
40 to 90 bottles/min at the counting station
Accuracy
≥99.5% with infrared photoelectric sensing
View machine

02Turnkey Production Lines

Powder Filling Production Line

Six stations under one PLC: unscrambling, closed screw feeding, auger filling, capping and labeling at up to 40 bottles a minute. Line accuracy holds within plus or minus 1%, and the filling station itself is documented better than 0.5%.

Line
GD-PFPL, unscrambler + screw elevator + filler + capper + labeler + collecting
Speed
0 to 40 bottles/min, about 2000 to 3000 bottles/hour
Accuracy
within ±1% at line level, 0.5% at the filling station
View machine

03Turnkey Production Lines

Complete Water Bottling Line

Eight stations sized to the same number: treatment at 2 t/h, blowing at 3,000 bottles an hour and a 3-in-1 rinsing filling capping block at 3,000. Buyers who assemble the same line from four suppliers usually spend the first month of commissioning chasing the mismatch.

Line
GD-WBPL, water treatment + blowing + 3-in-1 + sleeving + shrink packing + palletizing
Core capacity
3,000 bottles/h at the 3-in-1 and the blower
Treatment
2 t/h, configured from the source water report
View machine

04Turnkey Production Lines

Liquid Filling Production Line

Four stations driven by one PLC: bottles come out of the unscrambler, get dosed at ±1%, capped and labelled at up to 100 bottles a minute. Format changes run off a recipe screen instead of re-tuning three machines that were never built to run together.

Line
GD-LFPL, linear four-station, unscrambler + filler + capper + labeller
Speed
Up to 100 bottles/min, filling resolution 0.01 s
Volume
10 to 1000 ml at ±1%
View machine

05Turnkey Production Lines

Cheese Processing Production Line

Ten stations from raw milk receiving to pressing on a 4 t/day baseline, with the buffers sized at the design stage so no station waits on the one before it. Mozzarella, cheddar and fresh soft cheese run on the same line; changing variety is mostly a change of recipe and mould, not of equipment.

Capacity
4 t/day baseline, batch size 100–5000 L (500 L reference)
Stations
Ten — receiving, cooling, duplex filter, pre-heat, homogeniser, pasteuriser, fermentation, cheese vat, whey cart, press
Installed power
Approx. 100 kW, 380 V or 440 V, 50–60 Hz
View machine

About this range

A line is not a pile of machines. It is a set of transfer points, and the throughput of the whole is set by the slowest one. Most plants that outgrow their equipment discover the bottleneck is a buffer tank, not the filler.Each line below is described by its stations, its rated output and the point where it will need expansion first. Use it as a starting configuration, then adjust the station count to your product mix.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall