Product range

Cheese Making Equipment

Vats, curd knives, cutting frames and presses, with the cook and drain schedule each cheese style needs.

Pasteurising to packing

Heating, separating, homogenising, fermenting and filling, in the order the process runs.

Batch or continuous

Vats for batch work, inline units where the line runs without stopping.

Holding time held

Temperature and hold controlled inside the band the product needs.

Cleaned between runs

Contact surfaces, drain points and access laid out for daily cleaning.

3 machines in this range

Shown in full

01Cheese Making Equipment

Cheese Processing Production Line

Ten stations from raw milk receiving to pressing on a 4 t/day baseline, with the buffers sized at the design stage so no station waits on the one before it. Mozzarella, cheddar and fresh soft cheese run on the same line; changing variety is mostly a change of recipe and mould, not of equipment.

Capacity
4 t/day baseline, batch size 100–5000 L (500 L reference)
Stations
Ten — receiving, cooling, duplex filter, pre-heat, homogeniser, pasteuriser, fermentation, cheese vat, whey cart, press
Installed power
Approx. 100 kW, 380 V or 440 V, 50–60 Hz
View machine

02Cheese Making Equipment

Cheese Cutting Machine

Wire-grid cutting that turns a cheese block into cubes or strips in one or two passes, on a single lane or two, with the mould setting the size. A mould change is the whole size change, and the cut faces stay clean — no crumbs, no hidden give-away where a knife dragged through the block.

Models
GD-SCCM-I single lane 7 kW; GD-SCCM-II dual lane 7.5 kW
Cutting
Two-pass forming on the single unit, one-pass with both tools on the dual
Shapes
Cubes, sticks and slices; size set by the mould, not by the operator
View machine

03Cheese Making Equipment

Cheese Making Machine

A jacketed cheese vat from 100 to 1000 L in five models that carries pasteurising, culturing, coagulation, curd cutting and cooling through in the same vessel, held at ±1 °C. Because one vessel does all five steps, a batch no longer depends on how fast someone can work an open vat by hand.

Batch capacity
100–1000 L, five models in the GD-GCCM series
Function
Pasteurising, fermenting, coagulation, curd cutting, cooling
Accuracy
±1 °C fermentation control, VFD agitation 0–36 rpm
View machine

About this range

Cheese is the one dairy product where the vessel does almost everything: it heats the milk, holds it, inoculates, sets the curd and carries the first cut. That is why vat geometry and agitator design decide yield more than any downstream machine.Below are the vat and the cutting equipment that follow it, plus the full line for plants running from raw milk to pressing.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall