Product range

Milk & Yogurt Processing

Reception through pasteurisation, homogenisation and fermentation to the filler, for drinking milk, set and stirred yogurt.

Pasteurising to packing

Heating, separating, homogenising, fermenting and filling, in the order the process runs.

Batch or continuous

Vats for batch work, inline units where the line runs without stopping.

Holding time held

Temperature and hold controlled inside the band the product needs.

Cleaned between runs

Contact surfaces, drain points and access laid out for daily cleaning.

5 machines in this range

Shown in full

01Milk & Yogurt Processing

Dairy Cream Separator

Disc stack centrifuge with 400 to 3000 L per hour of milk output across four models, taking cream and skim milk out of two outlets continuously instead of waiting on gravity in a settling tank. Bowl speed runs from 5980 to 8300 rpm depending on the model, and the sludge discharge is automatic except on the smallest unit.

Milk output
400–3000 L/h across four models
Bowl speed
5980–8300 rpm, bowl diameter 230–400 mm
Discharge
Automatic sludge discharge; manual on GD-CS203
View machine

02Milk & Yogurt Processing

Vacuum Degasser

Continuous in-line deaeration at 500 to 1500 L per hour and -0.07 to -0.08 MPa, where the product is spread into a thin film inside the vacuum tank so dissolved and entrained air leaves in one pass. Filling then runs without foam, and the colour and vitamin loss that shows up weeks later on the shelf does not happen.

Capacity
500, 1000 or 1500 L/h, three standard models
Working vacuum
-0.07 to -0.08 MPa, water ring vacuum pump
Power
5.37 kW total, 380 V three phase
View machine

03Milk & Yogurt Processing

Mixing Tank

Jacketed stainless mixing tank from 50 L to 5000 L in nine sizes, with the impeller and the homogeniser matched to the viscosity of the product rather than sold as one universal head. Wall scrapers keep the film off the jacket surface, which is what stops the burnt bottom and the thin tail at discharge.

Capacity
50–5000 L working volume, nine standard models
Agitation
0–63 r/min anchor or paddle; homogeniser 0–3000 r/min
Heating
9–96 kW electric elements in the jacket, by model
View machine

04Milk & Yogurt Processing

Fermentation Tank

Three-layer jacketed fermentation tank from 100 L to 1000 L in six models, held on PLC temperature control and vented through a sterile breather with a filter element. The vessel stays closed from inoculation to discharge, so a batch sets to the same acidity and texture whether or not an experienced hand is on shift.

Capacity
100–1000 L working volume, six standard models
Temperature
45–90 °C adjustable, PLC control with live display
Body
Three layers — inner vessel, circulation jacket, insulation
View machine

05Milk & Yogurt Processing

Milk Pasteurizer Machine

Batch water-bath pasteurizer with mechanical agitation and a water-cooling circuit. Six sizes from 10 L to 200 L, temperature adjustable to 99 °C, holding time programmable. Built for milk bars, farm shops and small dairy rooms where milk has to keep for days, not hours.

Capacity
10–200 L per batch, six models
Heating
Indirect water bath, electric (steam or gas on request)
Temperature
Ambient to 99 °C, programmable holding time
View machine

About this range

Drinking milk, set yogurt, stirred yogurt and milk powder share the same front end: reception, clarification, separation, standardization, homogenization and heat treatment. What changes is the holding time, the temperature pair and what happens after cooling.The machines here cover that shared front end plus the fermentation and drying steps behind it. Each page lists the model range, the parameter that actually limits throughput, and the utilities you need on site.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall