Product range

Filling & Packaging Equipment

Fillers, cappers, labellers and sealers for bottles, jars, cups and tubes, matched to one line speed.

Filler to capper

Fillers, cappers, labellers and sealers matched to a single line speed.

Format changeover

Bottle, jar, cup and tube formats changed with guides and parts, not a rebuild.

Dose accuracy

Piston, auger or volumetric dosing chosen for how the product flows.

Drip-free filling

Nozzles, guards and contact parts arranged for clean, hygienic runs.

9 machines in this range

Shown in full

01Powder & Solid Filling

Counting Bottling Line

Eight stations from unscrambling to collecting, with desiccant insertion and induction sealing in between. The counting station runs 40 to 90 bottles a minute at 99.5% accuracy, and nothing moves unless a bottle sits under the gate.

Line
GD-ACBL, eight stations on one interlocked control
Speed
40 to 90 bottles/min at the counting station
Accuracy
≥99.5% with infrared photoelectric sensing
View machine

02Powder & Solid Filling

Counting Machine

Three-stage vibration separates sticky gummies before they ever reach the counting channels, and every channel carries its own sensor, so one blocked track does not drag the count. Rated 10 to 9999 pieces a bottle at 99% accuracy or better.

Model
GD-8, track-type photoelectric counting
Range
10 to 9999 pieces per bottle, 1 to 30 bottles/min
Accuracy
≥99%, up to 99.97% on track-type detection
View machine

03Powder & Solid Filling

Powder Filling Production Line

Six stations under one PLC: unscrambling, closed screw feeding, auger filling, capping and labeling at up to 40 bottles a minute. Line accuracy holds within plus or minus 1%, and the filling station itself is documented better than 0.5%.

Line
GD-PFPL, unscrambler + screw elevator + filler + capper + labeler + collecting
Speed
0 to 40 bottles/min, about 2000 to 3000 bottles/hour
Accuracy
within ±1% at line level, 0.5% at the filling station
View machine

04Powder & Solid Filling

Powder Filling Machine

Servo auger dosing holds better than 0.5% across a 10 to 2000 g fill, and a 75 L agitated hopper keeps the powder loose between refills. Most accuracy complaints start inside the auger, not in the operator's hands.

Model
GD-8, servo metering auger with PLC touch screen
Fill weight
10 to 2000 g, weighing range 1 to 6000 g
Accuracy
better than 0.5%, 30 to 45 fills per minute
View machine

05Liquid Filling Machines

Jelly Cup Filling and Sealing Machine

Filling and sealing in one automatic cycle, with a photo-sensing register that checks every cup and corrects film position on the fly. Bubbles, weak seals and crooked lids are the three faults buyers complain about, and all three start at this station.

Types
semi-automatic tabletop / fully automatic all-in-one / inline multi-station high speed
Cycle
cup drop, dosing, film feed, heat seal, trim, discharge
Products
jelly, pudding, frozen drinks and other gelled foods
View machine

06Liquid Filling Machines

Tube Filling and Sealing Machine

Eight stations on one rotary table: tubes come out of the inclined bin, get registered, filled, ultrasonically welded, trimmed and date-coded in a single index. 5 to 250 ml at up to 60 tubes a minute, with a flat tail that carries no trapped product.

Model
GD-60, eight-station rotary table, up to 60 tubes/min
Range
5 to 250 ml at ±1%, tubes Ø10 to 50 mm and 50 to 240 mm long
Seal
Ultrasonic welding with synchronous trimming and date coding
View machine

07Liquid Filling Machines

3-in-1 Filling and Capping Machine

Bottle in, sealed bottle out on one rotary table: filling, plugging, cap dropping and capping with a cam indexer holding position at every station. 5 to 30 ml at ±1%, 18 to 25 bottles a minute, and no station fires without a bottle under it.

Output
18 to 25 bottles/min on two heads, 20 to 25 on one head
Range
5 to 30 ml at ±1%, magnetic pump or piston by viscosity
Stations
Feed, fill, plug, cap drop and cap tighten on a cam-indexed turntable
View machine

08Liquid Filling Machines

Liquid Filling Production Line

Four stations driven by one PLC: bottles come out of the unscrambler, get dosed at ±1%, capped and labelled at up to 100 bottles a minute. Format changes run off a recipe screen instead of re-tuning three machines that were never built to run together.

Line
GD-LFPL, linear four-station, unscrambler + filler + capper + labeller
Speed
Up to 100 bottles/min, filling resolution 0.01 s
Volume
10 to 1000 ml at ±1%
View machine

09Liquid Filling Machines

Liquid Filling Machine

Servo piston dosing with 4 to 12 heads, 100 to 5000 ml and plus or minus 1 percent accuracy, where a format change is a parameter setting rather than a mechanical rebuild. Suck-back nozzles stop the drip, and the position sensor stops the fill when no bottle is present.

Heads
4, 6, 8, 10 or 12, independent servo metering
Fill range
100–5000 ml, accuracy within ±1%
Output
1200–2400 bottles per hour depending on head count
View machine

About this range

Filling is where the product meets the container, and almost every complaint about a filling line traces back to one of three mismatches: the filler head does not suit the viscosity, the container handling does not suit the bottle, or the capping torque does not suit the closure.The machines below are grouped by what is being dosed, because that is what determines the metering principle. Liquid, powder and solid-count filling behave nothing alike, and the same line will not run all three.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall