Product range

Mixing & Emulsifying

Jacketed tanks and high-shear mixers for dressings, sauces and recombined products that have to stay stable.

Pasteurising to packing

Heating, separating, homogenising, fermenting and filling, in the order the process runs.

Batch or continuous

Vats for batch work, inline units where the line runs without stopping.

Holding time held

Temperature and hold controlled inside the band the product needs.

Cleaned between runs

Contact surfaces, drain points and access laid out for daily cleaning.

3 machines in this range

Shown in full

01Mixing & Emulsifying

Vacuum Emulsifying Mixer

A three-layer jacketed tank holding vacuum while a bottom homogenizing head shears the batch, from 300 to 5000 L and up to 100,000 cps. Air comes out as the emulsion forms, so mayonnaise and face cream stop separating and stop foaming at the filler.

Tank volumes
300 / 500 / 5000 L, working charge below nominal
Viscosity
0 to 100,000 cps, anchor paddle with wall scrapers
Speed
0 to 3000 rpm, homogenizer and agitator on separate drives
View machine

02Mixing & Emulsifying

High Shear Homogenizer

A lifting dispersing head over a mobile covered vessel, 50 to 500 L per batch at 2880 r/min with inverter control. Change product by changing the drum, so a lab trial and a mid-volume run share one machine instead of two.

Batch size
50 / 100 / 200 / 300 / 500 L, five ratings
Drive
Copper-winding motor 2.2 to 7.5 kW, 2880 r/min with VFD
Lift
Electric or pneumatic, 400 to 600 mm stroke
View machine

03Mixing & Emulsifying

High-Pressure Homogenizer

A three-plunger reciprocating pump pushing product through a homogenizing valve at 20 MPa working pressure and a 25 MPa rating, at 100 to 2000 L/h. Fat globules go from 3 to 4 microns down below one, so milk stops throwing a cream line and yogurt stops turning gritty.

Series
GD-XMHG01, eight flow ratings from 100 to 2000 L/h
Pressure
20 MPa working, 25 MPa rated, two-stage mechanical setting
Fineness
Emulsion average below 1 micron, solid dispersion below 2 microns
View machine

About this range

Mixing looks like the simplest step in a dairy or beverage plant and is usually where batches go wrong. A paddle that suits milk will not wet milk powder, and a high shear head that disperses gum will whip air into a yogurt base.This group covers the three machine types that handle those differences: stirred tanks for liquid blending, vacuum emulsifying mixers for oil-water systems, and high shear units for powders and small batches.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall