Resources

Scaling a Small Lotion Batch on a High-Shear Disperser

Learn why RPM alone cannot scale a small lotion batch, and check dispersing-head design, working depth, circulation and vessel geometry before a production trial.

Published

7 October 2026

Read time

6 min read

Inside

11 sections, in reading order

Questions

Send the product and the batch size, we answer with figures.

Moving a lotion from a small trial vessel to a larger batch usually requires more than copying the same mixer speed. Head size, vessel dimensions, working depth and product circulation change how much material receives useful shear.

A lifting high-shear disperser can make vessel changeover convenient, but its operating range still needs to match both the smallest development batch and the normal production batch.

Identify the installed head first

The term homogenizer can describe different mechanisms. A toothed dispersing disc, a rotor-stator workhead and a high-pressure valve do not treat product in the same way.

The small unit in the current product material uses a lifting shaft and a high-speed dispersing head in a movable vessel. Confirm the supplied head geometry before specifying a required droplet size or assuming that it provides the same treatment as another mixer.

The [Silverson high-shear FAQ](https://new.silverson.com/us/resource-library/high-shear-mixing-faqs/) describes rotor-stator circulation and shear. That is useful background for understanding this alternative workhead, but it should not be used as proof that every dispersing-disc machine has rotor-stator construction.

Why matching RPM can be misleading

For a circular head, peripheral speed depends on diameter as well as rotation speed:

Tip speed = π × head diameter × revolutions per second.

As a simple illustration, a 0.10 m head at 3,000 rpm has a tip speed of about 15.7 m/s. A 0.20 m head at the same rpm reaches about 31.4 m/s. Those are geometric calculations, not recommended machine settings.

Matching tip speed alone also does not complete scale-up. Head design, energy input, processing time and the fraction of the batch reaching the active zone still influence the result.

Vessel geometry changes circulation

A larger batch in a disproportionately wide vessel can circulate differently from a deeper batch. The distance between the head and vessel wall, the bottom clearance and the liquid height affect how material moves.

The lifting mechanism should provide the required working position while the vessel remains securely located. The minimum batch must cover the head and sensors as specified by the manufacturer. A nominal 50 L vessel should not automatically be assumed suitable for a 5 L trial.

Watch the product during heating and cooling

Lotion viscosity can change substantially through the cycle. The mixer may circulate a warm phase well and then struggle after cooling or after a thickener develops.

Record when the batch becomes difficult to move and whether surface air is drawn in. If much of the product remains outside the active circulation pattern, extending processing time may produce a mixture of overtreated and undertreated material.

Some formulations need a separate bulk agitator or a vacuum vessel. The selection should follow those requirements rather than treating a lifting disperser as a complete replacement for every emulsifying system.

Build a useful comparison trial

Record at both scales Why it matters
Vessel internal diameter and working volume Defines the actual geometry
Head type, diameter and position Identifies how shear is generated
Speed and treatment time by stage Allows the process history to be compared
Product temperature and viscosity Explains changing flow behaviour
Cooled texture and stability results Shows whether the desired product was reproduced

Use the same evaluation method for the original trial and the larger batch. A product that looks smooth immediately after mixing may still require an agreed storage test to establish acceptable stability.

Establish a reference batch that can actually be repeated

Before increasing scale, repeat the successful small batch with a complete record. Identify the vessel dimensions, ingredient sequence, head geometry, operating stages and product evaluation method.

If the original result cannot be reproduced at its original size, moving to a larger vessel adds variables before the process is understood. First determine which inputs distinguish an acceptable trial from an unacceptable one.

Photographs of the vessel and head position can support the written record, but they should not replace dimensions. A visual estimate of half submerged is difficult to transfer between heads of different sizes or vessels with different product depths.

Compare the time available for circulation

A large batch contains more material that must reach the active treatment region. The relevant question is whether the complete batch circulates sufficiently during the defined treatment, not merely whether the head reaches the same nominal speed.

Observe whether added material distributes throughout the vessel or remains near the surface, wall or bottom. Use an agreed product measurement to compare locations where appropriate. A sample taken close to the head can give an optimistic view of a poorly circulating batch.

If circulation is inadequate, evaluate the vessel geometry and head arrangement with the supplier. Avoid simply extending the cycle indefinitely, since the part of the batch repeatedly passing the head may receive a different treatment history from the material outside the main circulation path.

Account for temperature rise during the trial

Mechanical processing can change product temperature, and the product's response may then differ from its starting condition. Record temperature at the beginning and through the relevant stages, using a method suitable for the process.

Keep that record alongside speed and time. If a longer treatment produces a smoother sample, determine whether the change is associated with additional treatment, a temperature change or both. The distinction matters when the production system has different heating or cooling capacity from the trial setup.

Where a heating belt or another thermal arrangement is offered, confirm what it controls and how product temperature is measured. A surface heating component is not automatically equivalent to a jacketed process vessel with a separately defined heat-transfer duty.

Evaluate small-batch changeover as a real operation

A movable vessel can simplify handling, but the complete changeover still includes stopping, lifting the head, securing or releasing the vessel, cleaning the required contact parts and preparing the next product.

Ask the supplier to demonstrate those actions with the proposed vessel sizes. Check the clearance around the lifting path and the method used to prevent vessel movement during mixing. Include any product remaining on the head or shaft in the residue record.

If several vessels are required to keep the mixer supplied, identify them in the equipment list. The cost and space of those vessels belong to the proposed operating arrangement rather than being treated as an unspecified future addition.

Connect scale-up to the downstream process

The liquid-preparation guide distinguishes the tasks performed by a disperser, a vacuum mixer and a pressure homogenizer. Use those distinctions to state exactly which product requirement the lifting unit must achieve.

Then follow the treated product to holding or filling. A successful batch may still entrain air or change condition during transfer. Evaluate the product at the stage relevant to the final specification rather than stopping the assessment at the mixer.

Create a documented scale-up decision

Compare the reference and production trials using the same quality measurements and clearly labelled operating records. List the conditions that produced an accepted result and any remaining variation between samples.

The final machine selection should identify the supported working range and actual head configuration. If some intended recipes or minimum batches remain untested, record that limitation explicitly in the purchasing discussion instead of assuming that a successful normal batch validates every possible use.

The [high-shear homogenizer page](/product/high-shear-homogenizer/) describes the lifting unit and vessel range. For a scale-up review, [send the successful trial recipe sequence, vessel dimensions, current head details and the intended production volume](/contact/). Include the smallest batch you actually need to run.

Related guides

Sizing equipment for your line?

Send the product, the batch size and the utilities you have. We reply with the model, the cycle time and what the cooling side needs.

WhatsApp Email
Process first, machine second — pick the product you make. All applications ›
Dairy processing tanks and plate heat exchangers installed in a production hall
Bottling line installed in a factory hall, bottles moving through the filler

Turnkey Production Lines

A complete line is more than a row of machines. We size the filler, the sealing station and the conveyor runs against your product, pack format and shift target, then deliver it as one commissioned unit.

Complete powder filling line running in a factory hall